|
mojčika -> RE: To ste že videle ? (18.11.2012 8:17:56)
|
Kopirano iz ene strani:
I used 1.5 yds of 60" wide jersey knit (I'm 5'3", size 6ish), put the slits 12" from each side, and made them 12" long. Unfortunately, it looked like the edges/corners of the slits are pulling more than I'd like so I had to reinforce them. I used a very short, fairly wide zigzag stitch on each side of the slit and went down the edge as well, essentially making an *enormous* buttonhole. (I would recommend doing this prior to cutting the fabric, like a good buttonhole, as I cut first asked questions later, I had to use a piece of paper as a tearaway backing to give enough stiffness to that floppy cut edge. Ugh.)
I added the snaps (small silver ones bc they were what I had - I would've ideally used larger black ones to blend in w the fabric) - I haven't tested it out extensively but I put them on the outside(right side of the fabric) per what it looks like on the Bina site. And I alternated the snaps around the corners, male, female, male, female so the left/right can be connected both w your arms in the slits or w your head in the slits. I'm guessing that's how Bina does it...?
|
|
|
|